MING 17.03 GMT - "BB" Edition
MING 17.03 GMT - "BB" Edition
MING 17.03 GMT - "BB" Edition
MING 17.03 GMT - "BB" Edition
MING 17.03 GMT - "BB" Edition
MING 17.03 GMT - "BB" Edition

MING 17.03 GMT - "BB" Edition

This edition is now sold out and will not be produced again.

All prices in CHF and include insured DHL courier worldwide.

Please note that the case material is TITANIUM and anodization is a surface treatment. Base titanium may show under scratches.

Saying farewell to the 17.03 GMT – with something special

The 17.03 GMT "BB" Edition is a special experiment and features a grade 2 titanium case that is anodised to a reddish-gold colour. Each case is unique and shows hints of yellow and red and continuously changes character when handled. Like its siblings in the 17.03 line, the BB Edition is powered by the automatic Sellita SW330-1 with independently adjustable second time zone indicator, is adjusted in five positions and run through a 250-hour test program.

The 17.03 BB case retains the same unique lugs that allow for both curved and straight springbar fitting - making it a versatile watch and compatible with standard 20mm aftermarket straps. Each watch is completed with a burgundy calf strap by Jean Rousseau Paris, and matching anodised titanium pin buckle.

The BB Edition is our farewell piece for the 17.03 line and there are only 25 watches available. 

  1. The case is grade 2 titanium that has been anodised to a reddish-gold colour. It is not a bronze case and as such will not patina or age with time. 
  2. Each 17.03BB case is unique as the anodisation process results in slight colour variation. The case colour is best described as a reddish-gold as it shows hints of red and yellow and continually changes character when handled.
  3. Anodisation is a surface treatment and if scratched, it will show bare metal underneath. This is the nature of the process and scratches to the coating are considered wear and tear and not covered by the mechanical warranty. 
  4. We also do not retain spare anodised cases, so once scratched, the case cannot be replaced. We can however, reanodise the case by special request and for a nominal fee but please note that the marks and scuffs will still be visible - just in a different colour. 
  5. Each 17.03BB is sealed in a plastic sleeve which is transparent to help you inspect it before unsealing. Once unsealed, the watch cannot be returned as it is considered worn. 
  • Functions: hours, minutes, and additional 24h timezone on inner ring
  • Case, dial & hands:
    • Reddish-gold anodized grade 2 titanium case with solid caseback
    • 38mm diameter, 9.8mm thickness, 43.9mm lug to lug measurement
    • Sapphire crystal with antireflective coating on both sides
    • Rigid case without spacer rings
    • 100m water resistance with triple crown gaskets and nitrogen filling
    • Composite, multi-layer, three-part sapphire dial
    • Textured burgundy dial
    • Hands and dial with Super-LumiNova C1
  • Straps
    • 1x burgundy smooth calf by Jean Rousseau Paris
    • 1x dark chocolate nubuck with white stitching
    • 1x anthracite nubuck with white stitching
    • 20x18mm, quick release with curved fitting
    • Will fit 160-210mm (6.1”-8.3”) wrist circumference
    • 1x signed pin buckle in anodized grade 2 titanium
    • 2x signed pin buckle in brushed grade 2 titanium
  • Movement:
    • Automatic mechanical movement Sellita SW330-1 top grade
    • 42-hour power reserve
    • 28,800 bph (4Hz)
    • 25 jewels
    • Hacking function
    • Movement adjusted to five positions with a 250-hour test program
  • Watch weighs 49g on a strap
  • 1-year warranty against defects
  • Made in Switzerland
  • Delivery package includes one calf strap by Jean Rousseau Paris (burgundy), two nubuck straps with buckles fitted (dark chocolate/ anthracite), and a travel pouch by Thirtyfour Bespoke of Kuala Lumpur
  1. All products go through a final round of quality control checks and are shipped from Malaysia.
  2. All products will be shipped worldwide via DHL, with insurance and tracking.
  3. Shipping restrictions: At this time, we are unable to ship to Israel due to prevailing import/export regulations. 
  4. DHL will require a signature from the buyer or their appointed representative at delivery, at which point responsibility for purchased goods passes to the buyer. 
  5. The buyer or their appointed representative’s signature on acceptance of the shipment is considered evidence of the date of delivery and fulfilment by MING.
  6. Shipping costs are not included in the product price and will be calculated at checkout.
  7. Taxes, customs levies and import duties are are not included in the product price (except for deliveries within Malaysia)
  8. Any customs levies, import duties and local taxes are the sole responsibility of the buyer.
  9. MING continually aims to improve aesthetics and functionality of products where possible; to this end we reserve the right to make minor changes prior to final delivery.
  10. For our complete Terms & Conditions, please click here.

Pre-orders

  1. Watches will be delivered in the order deposits are received.
  2. Delivery estimates are on a best-effort basis and the actual date of delivery may vary and depends on several factors.
  3. We will keep you up to date on any changes in the delivery schedule
  4. Pre-order deposits may be cancelled at any time up to shipment for a 50% refund.
  5. Should we be unable to fulfil your order, a full refund will be made via the original method of payment.

Product details

Saying farewell to the 17.03 GMT – with something special

The 17.03 GMT "BB" Edition is a special experiment and features a grade 2 titanium case that is anodised to a reddish-gold colour. Each case is unique and shows hints of yellow and red and continuously changes character when handled. Like its siblings in the 17.03 line, the BB Edition is powered by the automatic Sellita SW330-1 with independently adjustable second time zone indicator, is adjusted in five positions and run through a 250-hour test program.

The 17.03 BB case retains the same unique lugs that allow for both curved and straight springbar fitting - making it a versatile watch and compatible with standard 20mm aftermarket straps. Each watch is completed with a burgundy calf strap by Jean Rousseau Paris, and matching anodised titanium pin buckle.

The BB Edition is our farewell piece for the 17.03 line and there are only 25 watches available. 

To be aware of

  1. The case is grade 2 titanium that has been anodised to a reddish-gold colour. It is not a bronze case and as such will not patina or age with time. 
  2. Each 17.03BB case is unique as the anodisation process results in slight colour variation. The case colour is best described as a reddish-gold as it shows hints of red and yellow and continually changes character when handled.
  3. Anodisation is a surface treatment and if scratched, it will show bare metal underneath. This is the nature of the process and scratches to the coating are considered wear and tear and not covered by the mechanical warranty. 
  4. We also do not retain spare anodised cases, so once scratched, the case cannot be replaced. We can however, reanodise the case by special request and for a nominal fee but please note that the marks and scuffs will still be visible - just in a different colour. 
  5. Each 17.03BB is sealed in a plastic sleeve which is transparent to help you inspect it before unsealing. Once unsealed, the watch cannot be returned as it is considered worn. 

Specifications

  • Functions: hours, minutes, and additional 24h timezone on inner ring
  • Case, dial & hands:
    • Reddish-gold anodized grade 2 titanium case with solid caseback
    • 38mm diameter, 9.8mm thickness, 43.9mm lug to lug measurement
    • Sapphire crystal with antireflective coating on both sides
    • Rigid case without spacer rings
    • 100m water resistance with triple crown gaskets and nitrogen filling
    • Composite, multi-layer, three-part sapphire dial
    • Textured burgundy dial
    • Hands and dial with Super-LumiNova C1
  • Straps
    • 1x burgundy smooth calf by Jean Rousseau Paris
    • 1x dark chocolate nubuck with white stitching
    • 1x anthracite nubuck with white stitching
    • 20x18mm, quick release with curved fitting
    • Will fit 160-210mm (6.1”-8.3”) wrist circumference
    • 1x signed pin buckle in anodized grade 2 titanium
    • 2x signed pin buckle in brushed grade 2 titanium
  • Movement:
    • Automatic mechanical movement Sellita SW330-1 top grade
    • 42-hour power reserve
    • 28,800 bph (4Hz)
    • 25 jewels
    • Hacking function
    • Movement adjusted to five positions with a 250-hour test program
  • Watch weighs 49g on a strap
  • 1-year warranty against defects
  • Made in Switzerland
  • Delivery package includes one calf strap by Jean Rousseau Paris (burgundy), two nubuck straps with buckles fitted (dark chocolate/ anthracite), and a travel pouch by Thirtyfour Bespoke of Kuala Lumpur

Terms & conditions

  1. All products go through a final round of quality control checks and are shipped from Malaysia.
  2. All products will be shipped worldwide via DHL, with insurance and tracking.
  3. Shipping restrictions: At this time, we are unable to ship to Israel due to prevailing import/export regulations. 
  4. DHL will require a signature from the buyer or their appointed representative at delivery, at which point responsibility for purchased goods passes to the buyer. 
  5. The buyer or their appointed representative’s signature on acceptance of the shipment is considered evidence of the date of delivery and fulfilment by MING.
  6. Shipping costs are not included in the product price and will be calculated at checkout.
  7. Taxes, customs levies and import duties are are not included in the product price (except for deliveries within Malaysia)
  8. Any customs levies, import duties and local taxes are the sole responsibility of the buyer.
  9. MING continually aims to improve aesthetics and functionality of products where possible; to this end we reserve the right to make minor changes prior to final delivery.
  10. For our complete Terms & Conditions, please click here.

Pre-orders

  1. Watches will be delivered in the order deposits are received.
  2. Delivery estimates are on a best-effort basis and the actual date of delivery may vary and depends on several factors.
  3. We will keep you up to date on any changes in the delivery schedule
  4. Pre-order deposits may be cancelled at any time up to shipment for a 50% refund.
  5. Should we be unable to fulfil your order, a full refund will be made via the original method of payment.