2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic
2020 MING 20.01 Mosaic

2020 MING 20.01 Mosaic


Special Projects pieces in the archive are fully sold out and no longer available to order. However, future projects are always in the works – to register interest as an existing customer please e-mail us at hello@ming.watch.


Total production: 8 pieces, completed and delivered 2020

The 20.01 Mosaic was a special subscription piece created for our customers who supported the development of the mosaic process; made as an extension of the 20.01 S1 Concept Chronograph. Eight watches were produced and it has the following differences from the S1 Concept:

  • Sapphire mosaic dial, with 2,625 elements lasered at four different heights and varying opacity within the sapphire. Developed in partnership with Manufacture Schwarz Etienne and DM Surfaces SA.
  • Orange anodized aluminium pushers
  • Orange chronograph hands
  • Orange PVD chronograph plate
  • Upgraded clutch mechanism
  • Specific packaging, including a handmade leather briefcase, travel roll and wooden puzzle box
      • Functions:
        • Hours and minutes
        • Central chronograph with seconds and 60-minute counter
        • Instantaneous jumping minutes
      • Case, dial & hands:
        • 41.5mm diameter, 14.2mm thickness
        • Grade 5 titanium with 34 parts and 4 different finishes
        • Polished and brushed bezel and ‘flying blade’ lugs
        • DLC coated caseband
        • Orange aluminium pushers
        • Domed sapphire crystal front and rear, with double-sided antireflective coating
        • Front crystal with etched and luminous minute markings
        • 3mm thick sapphire dial with layered mosaic pattern and HyCeram fill
        • Hands with Superluminova X1 fill
        • Rigid case without spacer rings
        • 50m water resistance
        • 22mm lug width
      • Movement:
        • Agenhor for MING Agengraphe Cal. 6361.M1
        • 34mm diameter, 5.35mm thickness
        • Central chronograph with proprietary Agenhor coupling mechanism, regulator and upgraded clutch
        • Manual winding with overwind protection and twin skeletonized barrels
        • DLC coated bridges and plates in three shades with diamond cut anglage; orange chronograph bridge
        • ~60h power reserve at full wind
        • Movement adjusted to six positions
      • Made in Switzerland

      Product details

      Total production: 8 pieces, completed and delivered 2020

      The 20.01 Mosaic was a special subscription piece created for our customers who supported the development of the mosaic process; made as an extension of the 20.01 S1 Concept Chronograph. Eight watches were produced and it has the following differences from the S1 Concept:

      • Sapphire mosaic dial, with 2,625 elements lasered at four different heights and varying opacity within the sapphire. Developed in partnership with Manufacture Schwarz Etienne and DM Surfaces SA.
      • Orange anodized aluminium pushers
      • Orange chronograph hands
      • Orange PVD chronograph plate
      • Upgraded clutch mechanism
      • Specific packaging, including a handmade leather briefcase, travel roll and wooden puzzle box

        Specifications

          • Functions:
            • Hours and minutes
            • Central chronograph with seconds and 60-minute counter
            • Instantaneous jumping minutes
          • Case, dial & hands:
            • 41.5mm diameter, 14.2mm thickness
            • Grade 5 titanium with 34 parts and 4 different finishes
            • Polished and brushed bezel and ‘flying blade’ lugs
            • DLC coated caseband
            • Orange aluminium pushers
            • Domed sapphire crystal front and rear, with double-sided antireflective coating
            • Front crystal with etched and luminous minute markings
            • 3mm thick sapphire dial with layered mosaic pattern and HyCeram fill
            • Hands with Superluminova X1 fill
            • Rigid case without spacer rings
            • 50m water resistance
            • 22mm lug width
          • Movement:
            • Agenhor for MING Agengraphe Cal. 6361.M1
            • 34mm diameter, 5.35mm thickness
            • Central chronograph with proprietary Agenhor coupling mechanism, regulator and upgraded clutch
            • Manual winding with overwind protection and twin skeletonized barrels
            • DLC coated bridges and plates in three shades with diamond cut anglage; orange chronograph bridge
            • ~60h power reserve at full wind
            • Movement adjusted to six positions
          • Made in Switzerland